With the rapidly deteriorating water quality in India, it is important to know the safe drinking water guidelines in India and understand the Indian Standard Specifications for drinking water. Do not risk drinking contaminated water in India – learn about the best water purifier in India and safe water drinking guidelines in this blog.
Indian Standard Specifications for Drinking Water
When it comes to drinking water, it is important to be familiar with the different types of water that are specified by Indian Standard Specification. Different regions in India have different types of water, which can affect the quality and safety of the water that is consumed. In this blog, we will discuss some of the key factors to consider when determining whether water is safe to drink, as well as guidelines on how to purify, store and treat water safely before consuming.
One key thing to keep in mind is that Indian Standard Specification specifies five different types of water –
- Surface Water (such as lakes and rivers)
- Groundwater (groundwater from below the ground)
- Brackish water (water with a high salt content)
- Desalination plants for producing potable water from sea or salt water.
- Effluents (liquid waste discharged from industrial units).
It is important to be familiar with these types to make an informed decision about safe drinking water.
Another factor that you should consider when determining whether a particular body of water is safe for drinking is the presence of contaminants. Contaminants can come from a variety of sources, such as polluting factories, leaky pipes, and runoff from nearby farmland. To determine if a certain body of water contains contaminants, you will need to consult an expert who understands Indian Standard Specifications for drinking water and all relevant regulatory requirements.
Once you have determined that a particular body of water is safe for drinking, it’s important to understand how best to purify it before consuming it. Purifying methods include boiling (to remove bacteria), chlorination (to kill bacteria and viruses), and ultraviolet irradiation (to kill bacteria or filtration using activated carbon filters. Remember that even after purifying a drinkable source of freshwater may not meet all microbiological requirements if there are pathogenic microorganisms present in natural untreated waters which could conceivably contaminate treated supplies while being transported etc., particularly in rural areas where surface sources predominate.
How to Measure and Test the Quality of Drinking Water in India?
In India, the quality of drinking water is a major concern. Poor-quality water can lead to serious health problems, including diarrhea, intestinal blockages, and even death. To ensure that you are drinking safe water, it’s important to familiarize yourself with safe water drinking guidelines.
To start with, let’s take a look at the overview of safe water drinking guidelines. You should avoid consuming ANY tap or municipal water that does not meet specific safety standards. In addition to meeting specific safety standards, tap and municipal water should also be free of harmful bacteria and parasite levels should be within normal range. To test for these factors, use one of the following methods:
- Use a turbidity meter to measure how clear the sample is.
- Use an ammonia meter to detect levels of ammonia.
- Use pH meters to measure the acidity or alkalinity of the sample.
If any one of these indicators indicates that the drink is unsafe for consumption (e.g., high levels of turbidity or bacteria), then it is best not to drink from that source at all! In addition tap and municipal waters risk contamination from other sources such as agricultural runoff and industrial waste runoff which can contain harmful chemicals such as arsenic compounds which can cause skin problems such as eczema.
Now let’s take a look at some factors that you should consider when measuring and testing for water quality in India:
- The climate in your area – Indian climates vary significantly so it is important to take into account local conditions when assessing whether or not particular waters are suitable for consumption
- The type of infrastructure present – older systems may have more leaks but they may also be less likely to contaminate groundwater supplies due to corrosion; newer systems may be more reliable but they may also use more treated wastewater which could increase levels of pollutants
- Distance from major bodies of freshwater – If there are large bodies of freshwater nearby (such as rivers or lakes), groundwater near those sources would likely be contaminated too.
Water Quality Parameters in India
A safe and healthy drink is essential for everyone, but especially for people living in India. Thanks to a variety of environmental and health hazards, many Indians do not have access to clean drinking water. Over half the population lives in areas where the water quality is considered unsafe for human consumption.
To help ensure that all Indians have access to safe drinking water, the Indian government has set guidelines and standards for drinking water quality. The six essential parameters that determine drinking water quality are pH level, temperature, chlorine levels, total dissolved solids (TDS), turbidity, and copper levels. Each of these parameters must be met for a water supply to be considered safe for human consumption.
Unfortunately, many Indian cities suffer from unsafe water supplies due to several contaminants. Common contaminants that are found in Indian drinking waters include lead, arsenic, mercury, and chromium. These contaminants can have serious impacts on public health if they are consumed regularly over an extended period. For example, lead can cause nerve damage while arsenic can increase the risk of cancerous tumors.
To help monitor and enforce water quality regulations in India, technology has played an important role in improving water quality measurements over the past few decades. For example, devices that can measure pH levels remotely allow officials to detect problems with drinking water even when they are out of town or unavailable for inspection on-site.
Best Water Purifier Solutions for India
Water is essential for life, and it is important to make sure that everyone has access to clean and safe water. Unfortunately, many people in India do not have access to clean water, which is a major problem. Not only is unsafe water dangerous for the people who drink it, but it is also harmful to their health. As a result, the government has released safe drinking guidelines for the public. These guidelines explain what you can do to keep yourself and your loved ones safe from drinking unsafe water.
Safe drinking water is an essential need for all people living in India. Poor quality water can lead to serious health problems, but with the correct knowledge of Indian Standard Specifications, parameters to measure and test for water quality, and the best water purifier solutions like Livpure, individuals can ensure they are consuming safe drinking water. To protect yourself and your family from potential health concerns, it is important to be aware of the standards set by Indian Standard Specifications and how best to purify drinking sources to make informed decisions about what you consume.
At Livpure we believe that your safety comes first and hence, we have designed water purifiers that provide you with safe drinking water. Made with advanced purification technologies, our water purifiers are the best in the market. We urge everyone living in India to take a proactive approach toward ensuring their safety when it comes to drinking water.
Also read : What Should I Know Before Buying A Water Purifier For Health